24" 25" Full Chisel Chainsaw Chain 3/8 Pitch .050 Gauge 84 DL for Stihl Husqvarna Echo
Origin
Full chisel replacement chainsaw chain loop with 3/8 inch standard pitch, .050 inch gauge and 84 drive links. Fits matching guide bar and sprocket configurations used for felling, bucking and cutting firewood.
The full chisel cutter profile provides a sharp cutting corner suited to efficient cutting in clean wood. Supplied as a complete chain loop for installation on compatible equipment.
Technical Specifications
| Specification | Details |
|---|---|
| Pitch | 3/8 inch standard |
| Gauge | .050 inch / 1.3 mm |
| Drive links | 84 |
| Cutter type | Full chisel |
| Bar compatibility | Matching 24 or 25 inch configurations requiring 84 drive links |
| Product format | Complete chain loop |
| Package quantity | 1 chain |
| Guide bar included | No |
Compatible Applications
All models below require a guide bar and drive sprocket setup matching 3/8 inch standard pitch, .050 inch gauge and exactly 84 drive links.
| Brand | Selected Compatible Models |
|---|---|
| Stihl | MS 360, MS 361, MS 362, MS 390, MS 391, MS 400 C-M, MS 440, MS 441, MS 460, MS 461, MS 500i, MS 650, MS 660, MS 661 C-M |
| Husqvarna | 365, 372XP, 385XP, 390XP, 395XP, 455 Rancher, 460 Rancher, 555, 562XP, 565, 572XP, 575XP, 576XP |
| Echo | CS-590, CS-600P, CS-620P, CS-620PW, CS-680, CS-7310P, CS-7310PW, CS-800P |
| Dolmar | PS-6400, PS-7300, PS-7310, PS-7900, PS-7910 |
| Makita | DCS6401, DCS6421, DCS7301, DCS7901, EA7300P, EA7900P |
| Jonsered | 2165, 2171, CS 2166, CS 2172, CS 2186, CS 2188 |
| RedMax | GZ7000 |
| Shindaiwa | 680, 695, 757 |
Additional applications are possible when the equipment uses this exact chain configuration. Model name alone does not establish compatibility.
Chain Cross References
| Brand | Matching Reference |
|---|---|
| Oregon | 72EXL084G |
| Stihl | 33RS84E, 3623 005 0084 |
| Husqvarna | H47-84, C83-84, 501 84 26-84, 585550084 |
Cross references identify matching pitch, gauge and loop length. Manufacturer-specific cutter features may differ.
Confirm Fitment Before Ordering
Check the markings on your guide bar and count the drive links on your existing chain. All three measurements must match:
-
3/8 inch standard pitch
-
.050 inch gauge
-
84 drive links
Bar length alone is insufficient. Different bars of the same nominal length may require different chain lengths.
This chain is not interchangeable with 3/8 inch low profile chain, .058 or .063 inch gauge chain, or loops with a different drive link count.
Care and Maintenance
Maintain correct chain tension, adequate bar and chain lubrication, and sharp cutters. Follow the chain manufacturer’s instructions for sharpening angles, file diameter and depth gauge settings.